Want to get your quad trail-ready for riding season? If so, it is vital to prioritize your equipment's condition. To that end, don't miss out on these ATV maintenance tips by Schell Distributing Inc in Idaho Falls!
As the riding season kicks into high gear, it's time to give your ATV a well-deserved inspection to ensure a safe riding experience. Plus, let's not forget that regular upkeep can help keep your equipment running smoothly for far longer. Considering all those benefits, this post has gathered some of the best ATV maintenance tips and tricks. So, if you want to maintain your quad like a pro, keep scrolling!
Would you like to improve your ATV's performance? If so, choose the best synthetic oil in Idaho Falls. Visit AMSOIL's online store or call Schell Distributing Inc at (208) 524-0322 and make the switch today!
First, Read the Owner's Manual!
Before you hit the trails, pause and grasp your secret weapon: the owner's manual! It may not be a thrilling read, but it holds the keys to keeping your quad in shape for as long as possible. Thus, consult it to verify your ATV''s service schedule, recommended tire pressure, and more.
Inspect and Tighten All Bolts and Nuts
Start your ATV maintenance routine by checking all the bolts and nuts for any signs of looseness. Bumpy rides and rough terrains can cause vibrations that may gradually loosen these tiny pieces. To keep them tight, get a torque wrench and twist those bolts and nuts, ensuring they're snug and secure. As simple as this inspection sounds, it can save you from a lot of trouble on future rides.
Change the Oil and Filter
Like any other vehicle, your ATV's engine requires clean oil to operate optimally. Refer to your ATV's manual to check the recommended intervals for changing it. And don't forget to keep up with your oil filter changes! Doing so is integral in keeping the oil free of harmful contaminants that can harm your engine.
Clean the Air Filter
The air filter is your ATV's first defense against dust, dirt, and debris. However, this device can become clogged over use and time. If not cleaned, it can restrict airflow and reduce engine efficiency. So, to keep things running smoothly, clean or replace the air filter regularly. By ensuring proper airflow, you'll unleash your engine's full power and safeguard it from premature wear.
Check and Adjust the Chain
If your ATV is equipped with a chain drive, include it in your routine inspection checklist. This component needs to be properly tensioned and lubricated for optimal performance. So, refer to your manual for the recommended chain tension, and adjust it accordingly. Also, remember to apply chain lubricant to ensure smooth operation generously.
Switch to the best synthetic oil in Idaho Falls for unmatched engine protection. Need advice on the best oil formulas for your quad? Talk to the oil pros at Schell Distributing Inc by dialing (208) 524-0322 anytime. Also, stock up on everything you need for routine maintenance of your ATV through AMSOIL's online store.
Inspect and Maintain the Brakes
Brakes are your lifeline when it comes to controlling your ATV. Therefore, inspect the brake pads and discs for wear and tear. Replace them if necessary, as worn-out brakes can compromise your safety. Additionally, check the brake fluid level and top it up if needed. Doing all this will keep your ATV's brakes in top condition for a much safer riding experience.
Take a Look at the Battery
Want to avoid being stranded in the middle of nowhere with a dead battery? Keep the battery terminals clean and corrosion-free using a battery terminal cleaner and wire brush. If the battery is not sealed, mix the electrolyte with distilled water. If your ATV has been idle for long, consider using a battery tender to prevent it from draining. These simple checks will ensure your ATV's battery is ready for action when needed!
Lastly, Grease Moving Parts
From suspension to steering, some parts and pieces work hard to keep your quad in motion. Because of that, they demand regular lubrication to fight friction and premature wear. So, to keep them in top shape, check your manual to identify the specific points that need greasing. While at it, choose high-quality, waterproof grease for maximum and long-lasting protection. Doing this will help you prepare your ATV for worry-free trail rides.